Editorial Board
Editors-in-Chief (2)
Prof. Dr. Changhe Li
School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China
Interests: Sustainable Manufacturing; Cutting and Grinding; Precision Machining; Intelligent Manufacturing and Equipment; Energy Field Assisted Manufacturing
Prof. Dr. Seeram Ramakrishna
Center for Nanotechnology & Sustainability, Department of Mechanical Engineering, College of Design and Engineering, National University of Singapore, 9 Engineering Drive 1, 117576, Singapore
Interests: Circular Economy; Sustainability; Energy; Biomaterials; Nanofibers
Associate Editors (3)
Prof. Dr. Qinglong An
State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China
Interests: High Efficiency and Precision Machining Technology for Difficult-to-cut Materials; Sustainable Machining
Prof. Dr. Wenfeng Ding
National Key Laboratory of Science and Technology on Helicopter Transmission, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Interests: High Efficiency and Precision Machining Technology; Energy Assisted Machining Technology; Advanced Tools Technology
Prof. Dr. Yanbin Zhang
School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China
Interests: Sustainable Manufacturing; Grinding; Ultra-Precision Machining; Energy Field Assisted Manufacturing
Editorial Board Members (44)
Dr. Jean Claude André
CNRS-UL, University of Lorraine, 54000 Nancy, France
Phone number: 00(33)624427262
Interests: 3D Printing; 4D Printing; Bio-printing
Prof. Dr. Craig E. Banks
Faculty of Science and Engineering, Manchester Metropolitan University, Chester Street, Manchester, M1 5GD, UK
Interests: Electrochemistry; Additive Manufacturing; 2D Materials; Screen-printed Sensors; Electroanalysis
Dr. Antigoni Barouni
Advanced Polymers and Composites (APC) Research Group, School of Mechanical and Design Engineering, University of Portsmouth, Anglesea Road, Anglesea Building, Portsmouth PO1 3DJ, UK
Interests: Composite Materials; Structural Health Monitoring; Wave Propagation; Sustainable Composites Manufacturing
Dr. Li Chang
The School of Aerospace, Mechanical & Mechatronics Engineering, The University of Sydney, Sydney, NSW 2006, Australia
Interests: Tribology; Polymer Composites; Nanoindentation; Additive Manufacturing
Prof. Dr. Baoping Cai
College of Mechanical and Electronic Engineering, China University of Petroleum, Qingdao 266580 China
Interests: Offshore Oil and Gas Equipment Technology; Reliability Theory and Methods; Intelligent Fault Diagnosis Theory and Technology
Prof. Dr. Huajun Cao
State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing 400044, China
Interests: Advanced Manufacturing Technology; Green Manufacturing and Equipment; Manufacturing Systems Engineering
Prof. Dr. Michele Chiumenti
International Centre for Numerical Methods in Engineering, Technical University of Catalonia, Barcelona, Spain
Interests: Computational Mechanics; Finite Element Method; Computational Plasticity; Coupled Thermomechanical Problems
Prof. Dr. Sujan Debnath
Department of Mechanical Engineering, Curtin University Malaysia, Miri, Sarawak, Malaysia
Interests: Elastomer and Polymer Recycling; Green Composite Materials using Bio-Waste; Nano Polymer Composite; Advanced/Sustainable/Nano-enhanced Machining; Thermal Management in Electronic Packaging; Origami-inspired Folding Technique and Folding Design
Dr. Arnaud Duchosal
Mechanical Laboratory Gabriel Lamé, University of Tours, 7 Avenue Marcel Dassault, 37004 Tours, France
Interests: CFD; Machining; Additive Manufacture; Microstructure; Metal-working Fluids; Surface Integrity; Sustainability of Materials
Prof. Dr. Joao Paulo Davim
Department of Mechanical Engineering, University of Aveiro, Campus Santiago, 3810-193 Aveiro, Portugal
Interests: Machining; Composite Materials; Tribology; Sustainable Manufacturing; Industrial Engineering
Prof. Dr. Quadrini Fabrizio
Department of Industrial Engineering, University of Rome ‘Tor Vergata’, 00133 Rome, Italy
Interests: Smart Composites; Space Sustainability; Polymer Processing; Circular Economy; Additive Manufacturing; Space Materials and Structures
Dr. Mazzucato Federico
Department of Innovative Technologies, University of Applied Sciences and Arts of Southern Switzerland (SUPSI), Lugano-Viganello, Switzerland
Interests: Metal Additive Manufacturing; Direct Energy Deposition; Selective Laser Melting; Functionally Graded Materials; High Entropy Alloys; Design for Additive Manufacturing
Prof. Dr. Arkadiusz Gola
Department of Production Computerisation and Robotisation, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
Interests: Manufacturing System Design; Operations Management; Production Logistics
Prof. Dr. R. Gnanamoorthy
Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, India
Interests: Advanced Materials & Design; Surface Engineering; Damage Tolerant Design
Prof. Dr. Ivan Galvão
1. ISEL, Department of Mechanical Engineering, Polytechnic Institute of Lisbon, Rua Conselheiro Emídio Navarro 1, 1959-007 Lisboa, Portugal;
2. University of Coimbra, CEMMPRE, Department of Mechanical Engineering, Rua Luís Reis Santos,3030-788 Coimbra, Portugal
Interests: Welding Technology and Metallurgy; Mechanical Behaviour of Welded Joints; Solid-state Welding of Similar and Dissimilar Materials; Solid-state Processing of Materials
Prof. Dr. Benoit Iung
CRAN (Nancy Research Centre for Automatic Control, UMR CNRS 7039), Lorraine University (UL, France), Vandœuvre-Lès-Nancy, France
Interests: Maintenance Engineering; PHM; Predictive Maintenance Technologies; CPPS Engineering; Industry of the Future
Dr. Yijie Jiang
School of Aerospace and Mechanical Engineering, University of Oklahoma, 865 Asp Ave., Norman, OK 73019, USA
Interests: 3D Printing; Finite Element Analysis; Sustainable Manufacturing; Fucntional and Sustainable Composites; Interface Science
Prof. Dr. Mark J. Jackson
College of Technology and Aviation, Kansas State University, 2310 Centennial Drive, Salina, KS 67401, United States
Interests: Machine Tools; Machining; Grinding; Physics and Chemistry of Solids; Advanced Manufacturing
Prof. Dr. Muammer Koç
Division of Sustainable Development, College of Science and Engineering, Hamad Bin Khalifa University, Doha 34110, Qatar
Interests: Innovation for Sustainability; Education for Sustainability; Sustainable Financing; Predictive Modeling; Sustainable Consumption & Production; Sustainable Energy; Sustainable Manufacturing
Prof. Dr. Prashanth Konda
Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate Tee 5, 19086 Tallinn, Estonia
Interests: Powder Metallurgy; Additive Manufacturing; Selective Laser Melting; Meta-stable Materials; Amorphous Alloys
Prof. Dr. Stanislaw Legutko
Faculty of Mechanical Engineering, Poznan University of Technology, 60-965 Poznan, Poland
Interests: Additive Manufacturing; Precision Machining; Surface Integrity
Prof. Dr. Wenlong Li
State Key Laboratory of Intelligent Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, China
Interests: 3D Visual Measuring and Robotic Machining
Prof. Dr. Xin Liu
School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Interests: Multi-energy Field Composite Processing Technology; High Performance Valve Design and Manufacturing; Cold Plasma Medical Applications; Preparation and Application of Superwetting Functional Surfaces; Electrochemical Processing Technology; Ultrasonic Assisted Processing Technology
Prof. Dr. Carlos Leitao
CEMMPRE, Mechanical Engineering Department, University of Coimbra, Coimbra, Portugal
Interests: Friction Stir Welding; Modelling; Aluminum; Mechanical Characterization; Digital Image Correlation; Plasticity and Microstructural Characterization
Prof. Dr. Cong Mao
Scholar of Automotive and Mechanical Engineering, Changsha University of Science and Technology, Changsha, China
Interests: Precision Machining Technology; Engineering Equipment Optimization Design
Dr. Alokesh Pramanik
Department of Mechanical Engineering, Curtin University, GPO Box U1987, Perth WA6845, Australia
Interests: Machining Processes; Composite Materials; 3D Printing; Finite Element Analysis
Prof. Dr. Chander Prakash
Research & Developemnt, SVKM’S Narsee Monjee Institute of Management Studies, Mumbai, India
Interests: Functional Materials; Biomaterials; Additive Manufacturing; Sustainable Development Goals
Prof. Dr. Salman Pervaiz
Department of Mechanical and Industrial Engineering, Rochester Institute of Technology-Dubai, Dubai, United Arab Emirates
Interests: Additive Manufacturing; Sustainable Manufacturing; Machining and Metal Cutting
Prof. Dr. Andreas Rosenkranz
Department of Chemical Engineering, Biotechnology and Materials, Universidad de Chile, Santiago de Chile, Chile
Interests: Tribology (friction, wear, and energy efficiency)
Prof. Dr. Shubham Sharma
1 Mechanical Engineering Department, University Centre for Research and Development, Chandigarh University, Mohali, Punjab, 140413, India;
2 School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520, Qingdao, China
Interests: Advanced Materials Science and Characterizations; Manufacturing Processes and Production Technology; Sustainability; Solid Waste Management; Destructive and Non-Destructive Testings; Computational Approaches
Prof. Dr. Ramesh Singh
Department of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai, India
Interests: High-speed Micromachining; Flexible Reconfigurable Fiber Laser Based Materials Processing; Novel Finishing Techniques and Functional Characterization of Precision Finished Surfaces; Finite Element Modeling
Prof. Dr. Yong Sun
School of Engineering and Sustainable Development, De Montfort University, The Gateway, Leicester LE1 9BH, UK
Interests: Surface Engineering and Coating Technologies for Tribological; Corrosion Resistance and Biomedical Applications; Characterisation of Surface Engineered Systems; Tribology, Corrosion and Tribocorrosion of Surface Engineered Materials
Prof. Dr. Rossi Setchi
School of Engineering, Cardiff University, The Parade, Cardiff CF24 3AA, UK
Interests: Automation; Robotics; Symbolic Reasoning; Semantic Systems; Human-machine Systems; Sustainable Manufacturing; Metal Additive Manufacturing
Prof. Dr. GL. Samuel
Manufacturing Engineering Section, Department of Mechanical Engineering, Indian Instiute of Technology Madras, Chennai - 600036, India
Interests: Intelligent Manufacturing, Micro Manufacturing, Metrology and Computer Aided Inspection
Prof. Dr. Mehrdad Saif
Department of Electrical and Computer Engineering, University of Windsor, 401 Sunset Ave, Windsor, ON N9B 3P4, Canada
Interests: Cybersecurity; Systems/Control; Estimation/Observer; Fault/Attack Diag; Model Based/ML/AI Diag
Prof. Dr. Dapeng Tan
Key Lab of E & M, Ministry of Education and Zhejiang Province, Zhejiang University of Technology, Hangzhou, 310014, China
Interests: Computer-aided Dynamics (fluid-structure coupling); Embedded Control Systems; Intelligent Manufacturing; Precision Machining; Industrial Robots
Prof. Dr. Sergei Tarasov
Institute of Strength Physics and Materials Science SB RAS, 634055 Tomsk, Russian Federation;
Tomsk Polytechnical University, Russian Federation, 634030 Tomsk, Russian Federation
Interests: Materials Science; Tribology; Welding; Additive Manufacturing
Prof. Dr. Djordje Vukelic
Department of Production Engineering, Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovica, 6, 21000 Novi Sad, Serbia
Interests: Machining; Cutting Tools; Fixtures; Tribology; Sustainable Manufacturing
Prof. Dr. Chao Wang
Bert S. Turner Department of Construction Management, Louisiana State University, 3316B Patrick F. Taylor Hall, Baton Rouge, LA 70803, USA
Interests: Automation and Robotics; Occupational Safety and Health; Human Machine Interaction, Human Factor; Facility Management and Energy Efficiency
Prof. Dr. Dazhong Wang
Shanghai University of Engineering Science, Shanghai 201620, China
Interests: Precision Grinding and Polishing Robot Technology; Composite Material Intelligent Manufacturing and Health Monitoring; Tool Optimization Design and Development
Prof. Dr. Yihan Xing
Department of Mechanical and Structural Engineering and Materials Science, University of Stavanger, 4021 Stavanger, Norway
Interests: Floating Wind Turbines; Offshore Floating Structures; Marine Structures; Offshore Renewable Energy; Offshore Mechanics; Subsea Technology
Prof. Dr. Shaoping Xiao
Department of Mechanical Engineering, University of Iowa Technology Institute, The University of Iowa, , Iowa City, IA 52242, USA
Interests: Multiscale Modeling and Simulation; Nanocomposites; NEMS; Shock Wave Propagation and Spallation
Prof. Dr. Lida Zhu
School of Mechanical Engineering and Automation, Northeastern University, Shenyang, China
Interests: Machining Stability and Precision Machining Technology; Intelligent Diagnosis and Signal Processing; Ultrasonic Vibration Machining; 3D Printing and Additive and Subtractive Composite Processing
Dr. Justyna Żywiołek
Faculty of Management, Czestochowa University of Technology, 42-200 Czestochowa, Poland
Interests: Technologies for the Environment; Innovations; Society's Knowledge about Renewable Energy Sources
