Article Open Access

Metal-Free Lewis Pair Catalysts for a One-Pot Terpolymerization of Propylene Oxide, ʟ-Lactide and CO2

Sustainable Polymer & Energy. 2023, 1(1), 10002;

Shuxian Ye1,   Jiaxin Liang1,   Yansong Ren1,   Shuanjin Wang1,   Dongmei Han4,   Sheng Huang1,   Zhiheng Huang1,   Min Xiao1,*    Yuezhong Meng1,2,3,4,*   

The Key Laboratory of Low-carbon Chemistry & Energy Conservation of Guangdong Province/State Key Laboratory of Optoelectronic Materials and Technologies, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
Institute of Chemistry, Henan Academy of Sciences, Zhengzhou 450000, China
Research Center of Green Catalysts, College of Chemistry, Zhengzhou University, Zhengzhou 450001, China
School of Chemical Engineering and Technology, Sun Yat-sen University, Guangzhou 510275, China
Authors to whom correspondence should be addressed.

Received: 27 Nov 2022    Accepted: 11 Jan 2023    Published: 30 Jan 2023   


Multiblock and di-/tri-block copolymers are successfully synthesized for the first time via the metal-free terpolymerization of propylene oxide (PO), ʟ-lactide (LA) and CO2 in one-pot/one-step and one-pot/two-step protocols respectively. Firstly, triethyl borane (TEB) and bis(triphenylphosphine)iminium chloride (PPNCl) Lewis pair is employed in the ring-opening polymerization of LA, wherein the catalytic efficiency is significantly correlated to the TEB/PPNCl feed ratio. Next, a series of TEB/base pairs are selected to synthesize the PO/LA/CO2 terpolymer (PPCLA) in one-pot/one-step strategy. In PPCLA synthesis, LA exhibits the fastest reaction rate but the severe transesterification is almost unavoidable, resulting in low molecular weight products. In order to prepare high-molecular-weight terpolymers, a one-pot/two-step methodology has to be applied. By this method, the copolymerization of PO/CO2 proceeds first to form poly(propylene carbonate) (PPC) macroinitiators, which triggers the polymerization of LA to polylactide (PLA), leading to PLA-PPC or PLA-PPC-PLA block copolymers. The synthesized PLA-PPC-PLA block copolymers display an improved thermal stability compared with PPC.


Metal-free Catalysis; CO2 Utilization; Biodegradable; Multiblock copolymer; Polylactide; Polycarbonate
Creative Commons

© 2023 by the authors; licensee SCIEPublish, SCISCAN co. Ltd. This article is an open access article distributed under the CC BY license (